12 Sensor PressurePro Truck and 5th Wheel Tire
Pressure Monitor System
No tools are necessary to install
PressurePro and the system is simple to
operate.
Tire Pressure Monitor System for Trucks
pulling 5th Wheels or Trailers
This system comes with sensors for 12
wheels.
- It will monitor up to 18 wheels, by merely purchasing
more sensors.
- Properly inflated tires last longer. The life of your
tire is extended due to less tread wear.
- Pressure Pro requires no costly installation, installs
in minutes with no tools.
- The monitor can easily be relocated from the primary to
the towed vehicle with no additional installation.
- Properly inflated tires save fuel.
- Proper inflation protects and saves the tire casing,
reducing the chance of tire blowouts and zipper rips.
- Properly inflated tires extend the life of tire treads
by as much as 35%.
- Properly inflated and maintained tires save costly
roadside repairs and down time.
The Department of Transportation
estimates that 5.4 million gallons of fuel per day (over 2
billion per year) are wasted due to low tire
pressure.
Easy to Install!
No tools are necessary to install PressurePro and the system
is simple to operate.
A wireless, tire air pressure Sensor simply screws onto
the valve stem replacing the valve stem cap. The Monitor is
powered by plugging into the lighter accessory in the vehicle
and displays current tire pressure and can alert to low tire
pressures with both a visual and audible warning.
The Sensors constantly read the tire pressure and transmit
low-pressure readings when they occur. When tire pressure is
low, the Monitor identifies the low-tire position with an
audible beep, a blinking light for that location, and flashes
the real-time pressure to the operator.
This kit includes:
Monitor,
12
Sensors,
Velcro
Pads,
Power
Cord,
3-1/2" Whip
Antenna,
Complete
installation/operating instructions.
(Monitors will only
display the wheel positions that have
Sensors.)
Our Price
$790 
What is the "reminder"
alert?
PressurePro will alert first when there is a 12 1/2% pressure
loss from initial pressure at installation. You can "mute" the
audible alert by presssing the "ON" button which puts the
Monitor in "reminder mode". A second stage low pressure
alert will then "beep" when the pressure becomes 25% below the
original pressure, flash tire location, and display the actual
tire pressure value twice per second. If no button is pressed
to mute the system, the system will alert untl the low pressure
is corrected, or for a total of 15 hours. This feature allows
you to watch the Monitor to determine if the tire has a slow
leak or a fast leak. You can actually pump up the tire with a
portable compressor and continue to drive until you reach a
better location to fix the tire. It is a whole lot cheaper to
fix a tire than replace it!
| 